GOM Atos III – Industrial 3D Scanning Technology

The 3D-digitizer allows a global comparison of geometry to easily determine minimum and maximum shape deviations. Furthermore the reproducibility of demanded dimensional tolerances can be quantified.

The flexible and optical measuring instrument is based on the principle of triangulation. Two cameras record projected fringe patterns, the system calculates high-precision 3D coordinates for each camera pixel and a polygon mesh of the object surface is generated.

  • Geometrical target/current comparison of thickness, radii, freeform surfaces
  • Validation of forming simulations
  • Plastic tool deformation
  • Measuring of spring-back and tool wear
  • Tool measurement and CAD model comparison
Picture: PtU Bildarchiv
  • Manufacturer: GOM
  • System Setup: ATOS III
  • Measurement Time: 2 seconds
  • Measurement Volume:
    • 150 x 150 mm²
    • 550 x 550 mm²
    • 1000 x 1000 mm²
  • Accuracy: 4.000.000 measuring points
  • Measurement Point Distance: 0,07 mm to 1,0 mm